How to Set Left-handed Mode of PD1560 in Mac OS?
To use PD1560 in left-handed mode, you should turn the desktop of PD1560 upside down in 'System Preferences' and make 'Rotate Set' as 180 degrees in GAOMON driver.
If you didn't correctly set PD1560 into its left-handed mode, you'd only found ►【the cursor moves opposite to the nib】. Thus, here give you some suggestions to set the left-handed mode correctly.
While setting, we recommend you to use the mouse not the stylus to operate. Here takes an example based on
System: Mac OS High Sierra
GAOMON driver version: 14.1.4
----------------------------------------------------------------------
Content:
Solutions:
Firstly, make sure that GAOMON driver has been recognized by your PD1560.
Secondly, to flip the desktop of PD1560 in Mac System Preferences.
Thirdly, to rotate 'Work Area' of PD1560.
A. Mirroring Mode and Closed-display Mode
B. Extend mode
Related Posts:
----------------------------------------------------------------------
Solutions:
Firstly, make sure that GAOMON driver has been recognized by your PD1560.
1) Connect PD1560 to the computer based on macOS.
2) Boot the computer and then open the GAOMON driver interface
If the driver showed 'Device disconnected' in its lower left corner, please go to ►【How to Fix the 'Device Disconnected' of PD1560?】
If it showed 'Device connected', please follow the next solutions to set the configuration of displays.
For macOS users, there are three display modes: mirroring, closed-display, and extend mode. No matter which mode you decide to use, you should 'rotate' two settings. One is in Mac System Preferences; the other in 'Work Area' of GAOMON driver. To set the left-handed mode, it's different between Extend and 'mirroring and closed-display' mode. Please do as following parts.
Secondly, to flip the desktop of PD1560 in Mac System Preferences.
1) please click the Apple menu and then select 'System Preferences'
2) Type 'displays' in the search box to find the 'Displays' menu and open it
3) Now you may see a pop-out window named 'PD1560' and the other named 'Built-in display'. Please only focus on the window named 'PD1560'. There are three places you should notice as the following picture.
To set up the three places in the red circles one by one:
a. Click the window called 'PD1560'. If 'Optimize for' was not 'PD1560', please select 'PD1560' from its drop-down menu.
b. Here will be 'Best for PD1560'.
c. Select '180°' from the drop-down menu of 'Rotation', then click 'Confirm' to save changes.
4) Now the desktop of PD1560 has been upside down, but it doesn't mean you can use the left-handed mode normally.
5) Please turn PD1560 by 180 degrees to let Express Keys on your right side.
Thirdly, to rotate 'Work Area' of PD1560.
This step is important. If you didn't do it, the cursor will not be on PD1560. We separated into two parts: one for mirroring mode and closed display mode, the other for Extend mode.
A. ►【Mirroring Mode】 and ►【Closed-display Mode】
When you use mirroring displays or Closed-display Mode:
1) Open the GAOMON driver interface and click 'Work Area' tab.
2) To flip the work area of PD1560 by the following four steps.
PS: When in mirroring mode or Closed-display Mode, there is only one option for 'Select Current Display'. It is Display 1: [resolution numbers]. If there were three options: Display 1, Display 2, All Displays, you are in Extension mode and you should go to the next part 'Extension Mode' to get solutions.
a. Select Current Display: Here must be Display 1: 1920 x 1080 who represents PD1560. If not 1920 x 1080, the cursor will be offset. When it's not, please go back to read segment 2 and do as it says to set 'Optimize for' as 'PD1560'.
b. Click 'Full Area' button.
c. Select '180 °' from 'Rotate Set' menu.
d. Click 'Apply' to save changes.
Now you can use PD1560 in left-handed mode. Enjoy it!
B. ►【Extension mode】
When you choose Extension Mode: didn't select 'Mirror Displays' in the window of 'Built-in Display',
1) Open the GAOMON driver interface and click 'Work Area' tab
2) Select 'PD1560' as 'Current Display' from the drop-down menu of 'Select Current Display'
Resolution of PD1560 is 1920 x 1080. So generally speaking, to choose 'Display' appended with 1920 x 1080 is to select PD1560
If you were not sure which one is PD1560, please go to ►【Display1, Display2, and All Displays. Which One Is PD1560? 】 to get solutions.
3) To flip the work area of PD1560 by the following four steps:
a. 'Current Display' must be PD1560.
b. Click 'Full Area' button.
c. Select '180 °' from 'Rotate Set' menu.
d. Click 'Apply' to save changes.
Now you can use PD1560 in left-handed mode. Enjoy it!
————————————————————————————————
Related Posts：
►【How to Set The Left-handed Mode for Windows Users】 (The link is on the way)
►【Cursor Not on PD1560 but on iMac/MacBook】
►【Cursor Not on PD1560 but on Computer-in Windows System】
You can get other solutions by retrieving ►【FAQ Table】
——————————————————————————————————————————
If this solution failed to help you, please feel free to contact us. We're always here for you.
You can submit your issue from here: ►【GAOMON SUPPORT TEAM】.