How to Do When S56K or M106K Not Work/ Disconnected?

When your tablet, S56K or M106K, didn't work, or the cursor didn't move after you have connected them to the computer, please check their connection status and make them connect well to the computer. Here are the suggestions.

----------------------------------------------------------------------

Content:

How to know the connection status:

For S56K,

For M106K,

Solutions:

1. To re-plug cables firmly

2. To re-install the GAOMON driver by correct steps.

3. To plug into another USB port on the computer.

4. To change a new mini/micro USB cable.

5. To move the cursor by using your tablet pen without the driver.

6. To change to work on another computer.

----------------------------------------------------------------------

How to know the connection status:

For S56K,

Here are two ways for you to know whether your tablet connects or disconnects to the computer:

1) When the driver icon in the computer System Tray appears like this when connected with the computer, GAOMON S56K driver icon is like this , the tablet S56K has connected to the computer. When it is with an 'X' on the icon like this, the tablet has not connected to the computer.

2) When opening the Drive interface, you can also see a message 'Device connected' or 'Device disconnected' in its lower left corner.

GAOMON S56K driver interface shows 'Driver connected' in the lower left corner

——This shows S56K has connected to the computer.

For M106K,

1) When the driver icon in the computer System Tray appears in gray color like this the driver icon of PD1560/ M106K will be in gray color , the tablet hasn't connected to the computer. When it is in golden color like this When GAOMON driver icon is in golden color, the tablet has connected to the computer. , the tablet has connected to the computer.

2) When opening the Driver interface, you can also see a message 'Device connected' or 'Device disconnected' in its lower left corner.

In the lower left cornor of GAOMON driver tablet, a message will show you 'Device connected' or 'Device disconnected'

Solutions:

1. To re-plug cables firmly

Re-plug tablet cables firmly to the computer and your tablet. Many have resolved 'device disconnection' issue by this method.
If it failed to make the driver recognized by the computer, please try the following solutions to troubleshoot.

2. To re-install the GAOMON driver by correct steps.

Go ►here[1] to learn how to re-install the driver correctly. And before that you should pay attention to these important things:

1) Disconnect all the tablet cables from the computer before installation.

2) ►【Uninstall all the existing tablet drivers】, including other brand tablet drivers, such as Wacom's.

3) Close all anti-virus software and all drawing software

4) 'Run as an administrator' while installing the new driver.

5) DON'T change the installation path while installing.

After installation, check the connection status. If still not connected, please follow the next solution to try.

3. To plug into another USB port on the computer.

Plug the USB cable to another USB port on the computer. Please make sure you have pushed cables firmly to the ports

If still disconnected, please follow the next solution.

4. To change a new mini/micro USB cable.

Try to change another mini/micro USB cable to connect to the computer. Please make sure you have pushed cables firmly to the ports

If still not connected, try the following solutions.

5. To move the cursor by using your tablet pen without the driver.

1) ►【Uninstall the driver totally】 from your computer

2) Replug cables and make sure them being firmly connected.

3) Try to move the cursor by using the tablet pen.

If the cursor didn't move, try to solve it by the following solution.

If the cursor moved, please email to ►【service@gaomon.net】 with your issue description and the result of these solutions that you have done.

6. To change to work on another computer.

1) Prepare another computer.

2) Do not install the GAOMON driver on this computer.

3) Connect your tablet to this computer. Please make sure you have pushed cables firmly to the ports.

4) Use the tablet pen as a mouse to move the cursor.

5) No matter it moves or not, please send an email to ►【service@gaomon.net】. Tell us the results that you have gotten from practicing these solutions.

————————————————————————————————

►【How to Fix 'Device Disconnected' of PD1560?】

You can get other solutions by retrieving ►【FAQ Table】

——————————————————————————————————————————
If this solution failed to help you, please feel free to contact us. We're always here for you.

You can submit your issue from here: ►【GAOMON SUPPORT TEAM】.